Setting up a Brick Paver Walkway or Hanger Bricks

Using Installing a Brick Paver Walkway or White Bricks or Pavers to produce a walkway or outdoor patio complements a house in a method that is unequaled. It includes a level of quality and sophistication to a home entrance that can not be accomplished with either concrete or asphalt. Brick and Pavers also can be found in various colors and shapes enabling unique color schemes and patterns to be achieved. In addition, installing a Brick or Paver pathway does not always need a pro. With some fundamental knowledge and a fairly simple pathway strategy, a house owner can carrying out such a job.

The secret to installing a Brick or Paver Walkway is to first properly prepare the area where the bricks/pavers are to be installed. In addition, string lines need to be strung on each side of the pathway.
Once the area has actually been dug down, 3/4" gravel stone should be laid in and tamped down tightly. The height in between the tamped down sand and the stringline must equate to the thickness of the brick or paver.

Now that you have a steady base, place a 1" pipeline or ledger board the length of the walkway on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.

Now location on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared area. These strips will act as your pathway border and assistance to keep the stability and shape of the sidewalk.

As soon as this is done, you can then begin to lay the bricks/pavers. There are lots of patterns you can lay. I particularly like the Herring Bone pattern. The secret to laying the bricks/pavers is to make sure that they interlock with each other. Constantly stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will once again assist maintain get more info the stability of the walkway.

Inevitably bricks/pavers will need to be cut or divided when developing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and location the sculpt at a 75 degree angle over the spot where you desire to break the brick. If your pathway has curves you will require to buy/rent a wetsaw.

After setting up the bricks, construct up the outside edges with extra sand, and after that shovel in the topsoil and load down firmly.
Spread stone dust over the brand-new pathway and sweep into the fractures. This will complete the interlocking of the bricks and help to remove any weed development.


In addition, installing a Brick or Paver sidewalk does not necessarily require a pro. The key to installing a Brick or Paver Walkway is to very first properly prepare the area where the bricks/pavers are to be installed. Now that you have a steady base, place a 1" pipe or ledger board the length of the walkway on either side of the pathway. These strips will act as your walkway border and help to maintain the stability and shape of the walkway. Undoubtedly bricks/pavers will require to be cut or divided when building the pathway.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Setting up a Brick Paver Walkway or Hanger Bricks”

Leave a Reply

Gravatar